What is the average cost to replace fascia, or soffit and fascia together?
Short answer. Fascia is priced mostly by the linear foot, so a short rotted section is a modest repair while replacing or wrapping fascia around a whole house, especially with soffit included, commonly runs into the low thousands or more. Material, total eave length, house height and what turns up behind the old boards drive the number far more than any published average.
What the job includes
- Taking down gutters so the fascia can come off, then rehanging them or installing new ones.
- Removing rotted fascia and, if needed, soffit panels.
- Repairing what is behind them: sub-fascia, rafter tails or the edge of the roof decking.
- Installing new boards, then priming and painting or wrapping them in aluminum.
- New soffit, vented where the attic needs intake air.
What moves the price
- Footage. A few feet at one corner versus every eave on the house.
- Material. Primed pine is cheapest, cedar costs more, PVC and composite cost more still but do not rot. Aluminum wrap adds cost but ends painting.
- Height and access. Two-story eaves and steep lots take longer.
- Hidden rot. Rafter tails and decking edges cost more to fix than the board itself.
- Gutters. Old gutters often bend coming off and may need replacing.
Why fascia rots in the first place
Usually a missing or short drip edge, clogged gutters, or gutters hung without proper flashing. Replacing the board without fixing the water source just restarts the clock.
Insurance and timing
Rot from long-term moisture is maintenance, not storm damage, and is generally not covered. The best time to replace fascia is during a roof replacement, when the edge is open and new drip edge goes on. See roof anatomy explained, drip edge explained and gutter sizing, seamless gutters and guards.